Actions

Difference between revisions of "Graphics with Python"

From AstroEd

(A little 3D plotting)
(A little 3D plotting)
Line 260: Line 260:
 
== A little 3D plotting ==
 
== A little 3D plotting ==
  
One of the features that makes Mathematica and Matlab so useful is their built-in 3D plotting for multivariable surfaces and objects.  Matplotlib does this very easily in Python, but the features are so rich we can only touch on a few of them here.  For more, take a look at the other examples on the  [http://matplotlib.org/examples/index.html examples on the matplotlib website].
+
One of the features that makes Mathematica and Matlab so useful is their built-in 3D plotting for multivariable surfaces and objects.  Matplotlib does this very easily in Python, but the features are so rich we can only touch on a few of them here.   
  
 
As an appetizer, consider surface3d_demo2.py from matplotlib:
 
As an appetizer, consider surface3d_demo2.py from matplotlib:

Revision as of 05:56, 19 February 2013

The Python matplotlib module adds tools for interactive 2-D and 3-D graphics to our very short course in Python for scientific research. Matplotlib provides for easily generating and saving plots in file formats you can display on the web or in other programs, print, and incorporate in documents.

Installation of matplotlib

The current version 1.2 may be included in some Linux distributions. Version 1.1 has most of the features you will need now, and it is in Ubuntu and OpenSuse packages that can be added to your core Python system after you also install numpy. For example, under Ubuntu you would use

sudo apt-get install python-matplotlib

to get the most recent version available for your system and resolve missing components.

For Windows and MacOS users, if you installed the Enthought version of Python you will have it "out of the box". For others, look at the matplotlib installation website for directions on how to install it. You will need numpy too, and it also comes in the Enthought collection.


Once you have it installed, programs that use this library will have to import it with lines such as

import numpy as np
import matplotlib as plt

to make the functions available. With these, numpy functions will start with np. and mathplotlib functions will have plt. in front of the function name, which shortens the code you would write. You can check that your computer has numpy and matplotlib by trying these commands in interactive Python or Idle. The version numbers will be available too with

print np.__version__
print plt.__version__

Learning the basics of 2D data and function plotting

The matplotlib on-line user's guide offers a tutorial with many examples, some of which we will look at here. The guide may also be downloaded as a handy readable pdf for off-line reference. There is also a helpful but unfinished quick start guide written by an astrophysics graduate student.

Creating one plot

Let's look at a simple program that generates its own data and creates one plot you can view on the screen using pyplot, a MATLAB-like interface:

# Import the plotting and math packages
import matplotlib.pyplot as plt
import math
# Define initial constants
f0 = 5.
a0 = 100.
tdecay = 2.
# Create lists for the (x,y) data
time = []
amplitude = []
# Calculate the data and append to the lists
for i in range(0, 10000, 1):
  t = 0.001 * float(i) 
  a = a0 * math.exp(-t/tdecay)*math.cos(2. * math.pi * f0 * t)
  time.append(t)
  amplitude.append(a)
# Create an x-y plot of the data with labeled axes
plt.plot(time, amplitude)
plt.xlabel('Time')
plt.ylabel('Amplitude')
plt.title('A Damped Oscillator')

# Show the data
plt.show()


Most of this program is used to create and prepare the data lists. The plotting is done in one line! We add labels to axes, a title to the plot, and show the work. The way in which it appears will depend on our installation, but the default is a Tkl interface that offers control for panning, zooming, and saving as png file. The data go into the plot as lists, and appear by default as a drawn line connecting the points. However, if you prefer red circles to a "pen down" line, then change the plt.plot to

plt.plot(time,amplitude,'ro')

or to

'r--' # red dashes
'bs'  # blue stars
'g^'  # green triangles

The properties of the line would be controlled by variables in the plot function using MATLAB-style string/value pairs.

 plt.plot(time,amplitude, color='g', linewidth='2.0')

or alternatively a plot control function

 lines = plt.plot(time,amplitude)
 plt.setp(lines, color='r', linewidth=2.0)

This has the useful feature that interactively plt.setp(lines) will show you all the parameters and their values.

The data in this example are input as lists, but they could be tuples instead:

# Import the plotting and math packages
import matplotlib.pyplot as plt
import math
# Define initial constants
f0 = 5.
a0 = 100.
tdecay = 2.
# Create lists for the (x,y) data
time = []
amplitude = []
# Calculate the data and append to the lists
for i in range(0, 10000, 1):
  t = 0.001 * float(i) 
  a = a0 * math.exp(-t/tdecay)*math.cos(2. * math.pi * f0 * t)
  time.append(t)
  amplitude.append(a)
x = tuple(time)
y = tuple(amplitude)
# Create an x-y plot of the data with labeled axes
plt.xlabel('Time')
plt.ylabel('Amplitude')
plt.title('A Damped Oscillator')
oscillator = plt.plot(time,amplitude)
plt.setp(oscillator, color='m', linewidth=1.5)

# Show the data
plt.show()


This is what it looks like on the screen:

Damped cos screen.png

Saving the plot to a file

You may include a command to save a figure as a png file by adding

 fname = 'oscillator.png'
 plt.savefig(fname)

The savefig function is sensitive to the file type in the extension, and

 fname = 'oscillator.ps'
 plt.savefig(fname,dpi=600)

would be an example of a PostScript figure set to 600 dots per inch resolution. Supported formats are intended for high quality reproduction and include eps, ps, pdf, png, and svg, among others. The resolution may be controlled within the program, or in defaults for the user's custom startup file.

Overplotting and separated plots

Matplotlib's pyplot.plot takes two arrays as arguments and is aware of several modifiers that determine how the data are plotted. When you use plot, you should be aware that implicitly it creates a figure and a subplot, and then uses these with the data you have provided. The subplot(nrows, ncols, plot_number) function allows you to make arrays of 9 or fewer plots on the same page. When you only have one plot, it is subplot(1,1,1). You are allowed to leave out the commas if the result is unambiguous, and you will sometimes see this written (lazily) as subplot(111). A second subplot on row 2 would be subplot(212) and so on.

If the pyplot.plot function is repeated, it loads another set of x-y data into the one plot, each set with its own properties. The sets can be labeled, and the labels can be turned into legends in the plot. Here's a simple example:

# Import the plotting and math packages
import matplotlib.pyplot as plt
import math
# Define initial constants
f0 = 5.
tdecay = 2.
# Create lists for the (x,y) data
time = []
sine_amplitude = []
exp_amplitude = []
product_amplitude = []
# Calculate the data and append to the lists
for i in range(0, 10000, 1):
  t = 0.001 * float(i) 
  a1 = math.cos(2. * math.pi * f0 * t)
  a2 = math.exp(-t/tdecay)
  a = a1*a2
  time.append(t)
  sine_amplitude.append(a1)
  exp_amplitude.append(a2)
  product_amplitude.append(a)
# Create an x-y plot with labels
plt.xlabel('Time')
plt.ylabel('Amplitude')
plt.title('A Damped Oscillator')
plt.plot(time,exp_amplitude,'r.', label='Exponential')
plt.plot(time, product_amplitude,'b-', label='Sine', linewidth=1.5)
plt.legend()
# Show the data
plt.show()

In this case we used abbreviations for the keywords, but it is clearer to use the full text and to write, for example

plt.plot(time,product_amplitude, color='blue', linestyle = 'line', marker='None',
label='Sine', linewidth=1.5)

instead.


You may create two separate plots instead of one, in the previous example, by using pyplot this way:

# Create a figure
fig = plt.figure()
# Adjust white space between plots
fig.subplots_adjust(hspace=0.5)
# Create x-y plots of the data with labeled axes
data1 = fig.add_subplot(2,1,1)
plt.xlabel('Time')
plt.ylabel('Amplitude')
plt.title('Damping')
data1.plot(time,exp_amplitude,'r.', label='Exponential')
plt.legend()
data2 = fig.add_subplot(2,1,2)
plt.xlabel('Time')
plt.ylabel('Amplitude')
plt.title('A Damped Oscillator')
data2.plot(time,product_amplitude, color='blue', linestyle='solid', marker='None', label='Sine',
  linewidth=1.5)
plt.legend()
# Show the data
plt.show()

Other useful x-y data plotting functions

Other one-line plotting options that would create subplot(1,1,1) by default include

import pyplot as plt
plt.scatter
plt.semilogx
plt.semilogy
plt.loglog

Errorbars may be included with x and y data using

plt.errorbar(x, y, yerr=None, xerr=None)

It takes the x and y arrays, an array of y errors that defaults to None, and an array of x errors that also defaults to None.


For more information on plot and other built-in plotting types, see the pyplot documentation.

Tick marks and data ranges

You've noticed that when data are loaded as a list or tuple, the plot function automatically selects the data range for both axes, and supplies tick marks. You may add minor ticks and control their properties with

plt.minorticks_on()
plt.tick_params(which='major', length=7)
plt.tick_params(which='minor', length=4, color='r')  

where the first one turns on the minor ticks (minorticks_off() is the default), and the others change their length and color.


You may also limit the range of data shown in the plot and retain the automatic tick marking by adding functions such as these after creating the plot for the example show above

oscillator = plt.plot(time,amplitude)
plt.xlim(-10.,10.)
plt.ylim(-200.,200.)

With these limits, the range of x shown will be from -10 to +10 instead of the range in the x-data, and y will be shown from -200 to +200.


A little 3D plotting

One of the features that makes Mathematica and Matlab so useful is their built-in 3D plotting for multivariable surfaces and objects. Matplotlib does this very easily in Python, but the features are so rich we can only touch on a few of them here.

As an appetizer, consider surface3d_demo2.py from matplotlib:

from mpl_toolkits.mplot3d import Axes3D
import matplotlib.pyplot as plt
import numpy as np
fig = plt.figure()
ax = fig.add_subplot(111, projection='3d')
u = np.linspace(0, 2 * np.pi, 100)
v = np.linspace(0, np.pi, 100)
x = 10 * np.outer(np.cos(u), np.sin(v))
y = 10 * np.outer(np.sin(u), np.sin(v))
z = 10 * np.outer(np.ones(np.size(u)), np.cos(v))
ax.plot_surface(x, y, z,  rstride=4, cstride=4, color='b')
plt.show()

The first line imports a toolkit that provides 3d projection. For this one, you would need the mpl_tookits package.

The second line imports matplotlib.pyplot and uses plt to stand for it in our code.

The third line imports numpy, numerical Python, which we are going to look at in more detail later. Here, it provides a way to handle the data transparently even if you do not know how the code works yet.

We create a figure called "fig", and we add one and only one subplot "ax" that will hold our work. Notice that the subplot is a "3d" projection.

Numpy is used to create two linear arrays, one from 0 to 2 Pi that we think of as Phi, the azimuth angle in spherical coordinates. The other, from 0 to Pi, is Theta, the altitude of spherical coordinates. From these we calculate a set of x, y, and z that are the coordinates of points on a surface. Here, "np.outer" means "outer product" of two linear arrays, that is each of x, y, and z are matrices that contain the coordinates (x,y,z) of points on the unit sphere or radius 10 selected by the angles u and v.

The plotting is done in one line from the mpl toolkit with plot_surface(), and then dislayed for us to use with show().

From that little program we get an interactive 3D display of a sphere that looks like this:

Matplotlib 3d sphere.png


There's a 3D tutorial for matplotlib from their website illustrating other examples.